MULE 610 4X4 XC SE



Compact, comfortable, classy and fits in the back of a full-size pickup truck. The Mule 610 4x4 XC is a true go-anywhere worker thanks to its rugged 4-wheel drive and proven off-road capability. Wrapped in elegant, high-volume bodywork, the 610 takes no backseat to any Kawasaki, borrowing some of the best technology from Kawasaki’s ATVs and larger MULEs. 


Displacement 401cc
Type 4-stroke, OHV Single
Bore and stroke 82.0 x 76.0 mm
Cooling Air
Compression ratio 8.6:1
Fuel system Carburetor, Nikki 6C1026
Ignition Magneto & transistor
Lubrication Forced lubrication (wet sump)
Electrical 12-volt DC; 14-amp hour battery, 17-amp alternator
Exhaust Muffler with USFS-approved spark arrestor
Air Filter Snorkel-type with 2-stage dry replaceable element
Oil Filter Automotive-type spin-on canister


Front: type Sealed, auto-adjusting hydraulic drums
Rear: type Sealed, auto-adjusting hydraulic drums
Parking: Type Sealed, mechanical drums


Overall length 2,764 mm
Overall width 1,320 mm (52 in.)
Overall height 1,875 mm (73.8 in.)
Wheelbase 1,780 mm (70.8 in.)
Ground clearance 205 mm (8.1 in.)
Seat height 840 mm (33.1 in.)
Curb mass** 477 kg (1,052 lbs.)
Fuel capacity 15.5 L (3.4 gal.)
Cargo Box (inside) L x W x H 1044 x 900 x 245 mm


Transmission Kawasaki Automatic Power Drive Systems (KAPS): high/lo forward, neutral, reverse
Final drive Gear (Selectable 2WD/4WD) with limited slip front differential and dual-mode locking rear differential
Primary reduction ratio 3.653 ~ 0.794 (Belt drive torque converter)
Final reduction ratio 3.852 (16/18 x 39/9) Front, 4.000 (64/16) Rear
Gear Ratio: Forward (High) 3.464 (35/24 x 38/16)
Gear Ratio: Forward (Low) 5.125 (41/19 x 38/16)
Gear Ratio: Reverse 4.453 (30/16 x 38/16)


Type Ladder Type, Tubular Steel
Wheel travel: front 78 mm (3.1 in.)
Tire: front AT26 x 9R-12 Tubeless
Wheel travel: rear 79 mm (3.1 in.)
Tire: rear 26 x 9.00-12 Tubelss
Caster (rake)
Trail 40 mm (1.6 in.)
Steering angle (left/right) 35° (IN) / 29° (OUT), 37° (IN) / 33° (OUT)


Maximum Power 9.9 kW {13.5 PS} @ 4,000 rpm
Maximum Torque 30.0 N·m {3.1 kgƒ·m} @ 2,400 rpm
Minimum Turning Radius 3.6 mm (11.8 ft.)
Towing Capacity 500 kg (1,100 lbs.)
Maximum Cargo Bed Load 181 kg (400 lbs.)
Seating Capacity 2
Top Speed 40 km/h (25 mph) governed
Vehicle Load Capacity 420 kg (926 lbs.)


Suspension, front Independent, MacPherson Strut


Warranty 36 month warranty

Factory Limited Warranty Owner's Warranty Guide

This model comes with 36 months factory limited warranty. 


Kawasaki keeps the good times rolling with unlimited kilometers/hours of usage. We have you covered with our nationwide, Kawasaki dealer network. Visit any authorized Kawasaki dealer (for this product line) throughout Canada and continental USA for factory warranty coverage.


Click “Owner’s Warranty Guide” for full details regarding Kawasaki’s factory limited warranty coverage.

Kawasaki Protection Plus Learn More

Kawasaki’s own Kawasaki Protection Plus (KPP) goes the distance with available two, three, and four years of unlimited kilometers/hours additional coverage on top of the original Kawasaki limited warranty. That’s up to seven years total coverage depending on the base warranty term!


Feel secure knowing that Kawasaki Protection Plus repairs are performed only at authorized Kawasaki dealers (for this product line) throughout Canada and continental USA using only Kawasaki genuine parts.


Enjoy additional peace of mind with roadside assistance on street legal motorcycles. Buy early - roadside assistance coverage begins when you buy KPP.


No surprises. There’s no deductible fees with KPP for covered repairs.


Click “Learn More” for more details regarding Kawasaki Protection Plus.



Special offers

3.9% Financing 60 Months

Take advantage of our Special Retail Financing offer for as little as 3.9% for 60 months. Visit your local Kawasaki dealer today for complete details and get moving - for less - right now.

The 3.9% Special Retail Financing Promotion is available on select models sold by Canadian Kawasaki Motors Inc., purchased between March 31, 2017 and May 31, 2017. Receive a financing rate of 3.9% for up to 36 months, on approved credit, with the purchase of a KAF400FGF – MULE 610 4X4 XC SE. This promotion is time limited and certain conditions will apply. The 3.9% Special Retail Financing Promotion cannot be combined with any other promotion unless otherwise indicated. See your dealer for complete details.


Best kept secret

* The Manufacturer's Suggested Retail Price does not include freight, pre-delivery inspection or applicable taxes. The final price is at the discretion of the dealer. Prices and Specifications are subject to change without prior notice. The amount indicated as "Your price" may include an optional instant Mega Cash credit that is deducted from the manufacturer's suggested retail price before taxes. This promotion is time limited and certain conditions will apply. See your dealer for complete details. Offer not available on financed purchases and cannot be combined with any other special offers. The final price is at the discretion of the dealer. Prices and Specifications are subject to change without prior notice.

** Includes all necessary materials and fluids to operate correctly, full tank of fuel (more than 90% of capacity) and tool kit (if supplied)

‡ Power / Torque figures measured at the crankshaft.

The specifications mentioned here apply to and have been achieved by production models under standard operating conditions. We intend only to give a fair description of the vehicle and its performance capabilities but these specifications may not apply to every machine supplied for sale. Kawasaki Heavy Industries, Ltd. reserves the right to alter specifications without prior notice. Equipment illustrated and specifications may vary to meet individual markets. Available colours may vary by market.