Choose your model

Select categories

KQR Flip-Up Polycarbonate Windshield

PART #: 99994-1184

Three-position Flip-Up Polycarbonate Windshield allows for a sealed windshield with the ability to flip up to let just the right amount of air into the cabin

 

  • Closed and vented positions allow occupants to limit air flow while driving, while the fully open position provides maximum airflow when stopped
  • Made from 4.5mm (0.177”) scratch-resistant polycarbonate (hard coated)
  • Compatible with the Hard Cab Enclosure

Vehicle must be positioned in the forward facing direction and Flip-Up Polycarbonate Windshield must be in the closed and locked position while towed on open trailers

$1,272.08 Add to wishlist Fits Which Model

KQR Fixed Polycarbonate Windshield

PART #: 99994-1154

Polycarbonate windshield material helps provide protection from the elements

 

  • KQR Full Windshield, Polycarbonate (99994-1154) can be installed or removed without tools
  • Can be used with any combination of soft doors, rear panels, and roofs offered by Kawasaki
  • Sliding lower vent system provides improved ventilation and cabin comfort
  • Not compatible with Hard Cab Enclosure Door Set (99994-1162)

Vehicle must be positioned in the forward facing direction when towed on open trailers

$797.78 Add to wishlist Fits Which Model

Half Windshield

PART #: 99994-1178

Deflect direct wind blasts while maintaining comfortable air-flow throughout cabin with this Half Windshield

 

  • Made from hard coated polycarbonate
$286.54 Add to wishlist Fits Which Model

CV Joint Guard Set, Front and Rear

PART #: 99994-1170

3/8 inch thick HMW (High Molecular Weight) plastic covers help protect A-arms and drive shaft boots from damage

$236.43 Add to wishlist Fits Which Model

Brush Guard

PART #: 99994-1153

Made from 38mm (1.5 inch) powder-coated steel for extra protection when attached to stock bumper

 

  • Includes headlight guards
  • Bumper comes pre-threaded for easy mounting
  • Required to mount optional LED Light Bar (99994-1179), sold separately
  • Fits with Plow Mount (99994-1169), Plow Frame (99994-1205), and Plow Blade (99994-1206) installed
  • Does not interfere with the mounting or use of a winch
$281.11 Add to wishlist Fits Which Model

Skid Plate Set

PART #: 99994-1193

Help protect your drivetrain and chassis with a durable three-piece HMW (High-Molecular Weight) Kawasaki Genuine Skid Plate Set

 

  • Constructed of 6.35mm (1/4 inch) thick HMW these skid plates help provide additional protection to your investment’s under body
  • Designed to easily replace OEM guards
$320.68 Add to wishlist Fits Which Model

Rear Bumper

PART #: 99994-1183

This stylish yet functional accessory adds protection to the rear of your vehicle

 

  • Made of durable 48mm (1 7/8 inch) diameter steel tube
  • Powder coated in textured black to provide a uniform look with stock components
$264.05 Add to wishlist Fits Which Model

Tail Light Guard Set

PART #: 99994-1185

  • Reduce the risk of damage and related repairs to tail lights
  • Powder coated in textured black to provide a uniform look with stock components
  • Made of 2.3mm (3/32 inch) thick steel
  • Some drilling and rivet gun required
$67.22 Add to wishlist Fits Which Model

Seat Cover, Black

PART #: 99994-1191

Help protect your contoured bench seats from the elements with these Seat Covers

 

  • Quick installation
  • Made from heavy canvas
  • Features an elastic band along the cover's edge
  • O.E.M. quality fit
$179.35 Add to cart Add to wishlist Fits Which Model

Seat Cover, TrueTimber HTC Green

PART #: 99994-1241

Help protect your contoured bench seats from the elements with these Seat Covers

 

  • Quick installation
  • Made from heavy canvas
  • Features an elastic band along the cover's edge
  • O.E.M. quality fit
$190.39 Add to cart Add to wishlist Fits Which Model

Cargo Bed Lift

PART #: 99994-1167

“Earth Mover” grade hydraulic power by KYB

 

  • Self-contained hydraulic system; no hoses, no reservoir to fill or top off, no bleeding process
  • Simple installation, without arms or levers
  • Weight capacity 800 lbs
$1,295.34 Add to wishlist Fits Which Model

Cargo Bed Mat

PART #: 99994-1188

Tough 7.9mm (5/16 inch) extra thick rubber protects cargo and bed surface

 

  • Prevents cargo from sliding
  • Reduces sound levels
  • MULE logo in the center of mat
$157.84 Add to wishlist Fits Which Model

KQR Cargo Box

PART #: 99994-1168

Add sealed storage within your vehicle’s cargo bed

 

  • Up to four KQR Cargo Boxes can quickly attach to either cargo bed rail without tools once assembled
  • Ample internal storage space for transporting tools, equipment, straps, tie-downs, emergency kits, trail snacks, etc…
  • KQR Cargo Box measures 686mm (27 inch) L x 381mm (15 inch) W x 381mm (15 inch) H
  • Molded LDPE black plastic
  • Requires two KQR Accessories Mounts (KAF080-012) sold separately
$287.63 Add to wishlist Fits Which Model

KQR Cargo Bed Extender/Divider

PART #: 99994-1192

  • Extend your usable cargo space by 8 inches with this durable black powder coated steel Bed Extender/Divider
  • Simply lower the tailgate and attach the extender to the bed rails with two KQR clamps
  • Easily adjust to different cargo sizes by sliding the clamps forward or backward or by reversing the entire Bed Extender to create a divider
  • Two KQR Accessory Mounts Required (KAF080-012) required (sold separately)
$268.71 Add to wishlist Fits Which Model

KQR Accessories Mount

PART #: KAF080-012

Required for quick-mounting a variety of KQR Genuine Accessories and/or tools to the vehicle bed and rear cab rails. Mounts are sold individually and are constructed of black anodized aluminum for durability.


  • NOTE: Refer to each KQR accessory for the quantity of mounts required

 

$32.00 Add to wishlist Fits Which Model

Plow Blade, 72 inch

PART #: 99994-1206

Made from thick 12-gauge steel with heavy-duty ribbing and a center cross member for added rigidity

 

  • Boxed design adds extra support
  • Special low-friction powder coated finish helps keep material from sticking to the blade
  • 1,829mm (72 inch) width allows you to move a large amount of material at one time
$430.09 Add to wishlist Fits Which Model

Plow Frame

PART #: 99994-1205

  • Heavy duty tubular steel construction
  • Designed for strength, durability, and impact resistance
  • Simplified connection system allows for quick attachment and removal of Plow Blade once installed
  • 5 point adjustment system (30°, 15°, 0°, -15°, -30°) offers a solution for a wide range of plowing scenarios
$650.52 Add to wishlist Fits Which Model

Plow Mount Plate

PART #: 99994-1169

Connection system features a self-locating rod and hooks for quick removal of Plow Blade and Frame once installed

 

  • Mount is located at the front of the vehicle
$439.22 Add to wishlist Fits Which Model

KQR Gun Mount For Kawasaki Gun Defender By ATV/UTV TEK

PART #: 99994-1173

This KQR Gun Mount allows for secure, convenient weapon storage within the bed of your MULE

 

  • Securely fastens Gun Defender
  • Designed to allow for ergonomic gun loading angle while maximizing the bed space below
  • Can hold two Kawasaki Gun Defenders by ATV/UTV TEK
  • Quickly attaches to the rails of the vehicle’s cargo bed using KQR clamps
  • Powder coated black
  • Kawasaki Gun Defender (99994-1204) sold separately
  • Requires two KQR Accessories Mounts (KAF080-012), sold separately
$188.42 Add to wishlist Fits Which Model

Kawasaki Gun Defender By ATV/UTV TEK

PART #: 99994-1204

Injection molded design offers superior strength as well as high water and dust resistance

  • Defender design accommodates standard length and longer rifle barrels
  • Additional width in the right places eliminates interference with bolts and target style turrets
  • Fully customizable hybrid interior structure ensures a secure hold and protection for any gun
  • 1 1/4 inch receiver slider makes for easy on, and easy off of the machine
$177.40 Add to cart Add to wishlist Fits Which Model