Choose your model

Select categories

Rear View Mirror

PART #: 99994-1175

3D curved safety glass provides increased field of view

 

  • Textured black powder coating
  • Cast aluminum mounting that works with 38.1mm (1.5 inch) to 45mm (1 7/8 inch) diameter tubes
  • 273mm (10 3/4 inch) L x 89mm (3.5 inch) H
$93.75 Add to wishlist Fits Which Model

Rear View Mirror

PART #: TX750-077

  • 3D curved safety glass mirror provides excellent field of view
  • Durable textured black powder coating
  • Aluminum mounting with 43mm diameter clamp
  • 3.5 inch x 10.75 inch

 

$84.15 Add to wishlist Fits Which Model

Center Console

PART #: KAF080-032

Safely store small tools, important documents and any additional items in this durable water resistant Center Console. Hinged lid locks into place when closed and is covered with a 19mm (¾ inch) thick foam pad for driver and passenger comfort. Attaches quickly and easily to the front bench seat in the center passenger position with provided shock cords.


  • 533mm (21”) L x 260mm (10.25”) W x 203mm (8”) H
  • Made of Roto-molded HDPE with a textured black finish
$177.66 Add to wishlist Fits Which Model

Floor Mat Set, Front

PART #: KAF080-033

Protect your feet and floorboards with these tough 3/16 inch extra thick rubber mats. Each mat has been molded for a perfect fit and mounts directly to the floorboard to help prevent movement. The extra thick rubber also reduces sound levels caused from vibration. Front driver and passenger side mats included.

$212.98 Add to wishlist Fits Which Model

Floor Mat Set, Rear

PART #: KAF080-034

Protect your feet and floorboards with these tough 3/16 inch extra thick rubber mats. Each mat has been molded for a perfect fit and mounts directly to the floorboard to help prevent movement. The extra thick rubber also reduces sound levels caused from vibration. Rear driver and passenger side mats included.

$175.48 Add to wishlist Fits Which Model

Underseat Storage Bin

PART #: 99994-1029

Storage space is always a premium, especially when on the trail or at the job site. Add additional storage securely and out of sight with this easy-to-access Under Seat Storage Bin

 

  • Mounts under front bench seat
  • Polyethylene construction
  • Matching snap-on lid
  • Storage Bin removes easily for cleaning once installed
  • 28 liter storage capacity
$198.93 Add to wishlist Fits Which Model

Flip-Up Polycarbonate Windshield

PART #: 99994-0753

Three-position Flip-Up Polycarbonate Windshield provides the option for a sealed windshield with the ability to flip up to let just the right amount of air into the cabin

  • Closed and vented positions allow occupants to limit air flow when driving while the fully open position provides maximum airflow while stopped
  • Made from 4.5mm (0.177 inch) scratch-resistant polycarbonate (hard coated)
  • Installation requires no drilling

 

Towable in forward facing postion only.  Flip-Up Polycarbonate Windshield must be in the closed and locked position.

$1,067.22 Add to wishlist Fits Which Model

KQR Fixed Polycarbonate Windshield

PART #: KAF080-001

The KQR Full Windshield can be quickly installed or removed with minimal use of tools and provides excellent protection from wind and debris for improved in-cabin comfort.

 

  • Made from polycarbonate scratch-resistant material
  • Clear plastic Windshield easily mounts with KQR clamps system
  • Drilling required for center mount bracket
  • Required component of the Kawasaki Genuine Soft Cab Enclosure
  • Three large fresh-air open and closable vents located on windshield to increase airflow in cab
$927.29 Add to wishlist Fits Which Model

KQR Half Windshield

PART #: KAF080-027

Deflect direct wind blasts while maintaining comfortable air-flow throughout cabin with this KQR Half Windshield. And with the added KQR installation system, once installed, you can quickly install and remove the windshield without the use of tools.

$324.36 Add to wishlist Fits Which Model

Brush Guard

PART #: 99994-0412

Add protection and aggressive style to the front of your vehicle with this durable laser cut, formed steel brush guard.

 

  • Powder coated in textured black to match the stock front bumper for a uniform look
  • Built-in headlight guards
  • Mounting tabs for the Kawasaki Genuine LED Lighting Kit
  • Steel 38mm (1.5 inch) diameter tubing / 2.1mm (8/100 inch) wall thickness
  • NOTE: Does NOT interfere with Kawasaki Genuine Winch Mount or Snow Plow
$318.10 Add to wishlist Fits Which Model

CV Joint Guard Set, Front

PART #: 99994-0428

While operating your vehicle in rough terrain these lightweight CV Joint Guards protect your a-arms, axles, brake-lines and CV Boots. In addition to protection, the full-coverage design adds a custom look to your vehicle.


  • Brushed Aluminum
  • Set of 2
  • NOTE: Rear CV Joint Guards sold separately

 

$226.36 Add to wishlist Fits Which Model

Skid Plate, Front

PART #: 99994-0438

Helps protect your drive chain and chassis with a durable brushed aluminum Kawasaki Genuine Skid Plate

 

  • Unlike the aftermarket, each plate has been designed with precise ventilation holes and has been tested to prevent high engine temps during hard use or hot weather
  • Made of 4.7mm (3/16") thick 5052 Aluminum
  • Brushed aluminum finish
$633.53 Add to wishlist Fits Which Model

Skid Plate, Middle

PART #: 99994-0439

Protect your drive chain and chassis with a durable brushed aluminum Kawasaki Genuine Skid Plate. Unlike the aftermarket, each plate has been designed with precise ventilation holes and has been tested to prevent high engine temps during hard use or hot weather.


  • 5052 Brushed Aluminum .190 inch thick
  • NOTE: Front and Rear Skid Plates sold separately
$507.83 Add to wishlist Fits Which Model

Skid Plate, Rear

PART #: 99994-0512

Protect your drive chain and chassis with a durable brushed aluminum Kawasaki Genuine Skid Plate. Unlike the aftermarket, each plate has been designed with precise ventilation holes and has been tested to prevent high engine temps during hard use or hot weather.


  • 5052 Brushed Aluminum .190 inch thick
  • NOTE: Mid and Rear Skid Plates sold separately
$492.29 Add to wishlist Fits Which Model

CV Joint Guard Set, Rear

PART #: 99994-0429

While operating your vehicle in rough terrain these lightweight CV Joint Guards protect your a-arms, axles, brake-lines and CV Boots. In addition to protection, the full-coverage design adds a custom look to your vehicle.


  • Brushed Aluminum
  • Set of 2
  • NOTE: Front CV Joint Guards sold separately
$223.17 Add to wishlist Fits Which Model

Rear Bumper

PART #: 99994-0413

Make sure the rear of your vehicle is protected from unintended impact while backing-up or loading your cargo bed with this durable, 1 7/8” diameter tubing Rear Bumper. Powder coated in textured black to provide a uniform look with stock components.

  • NOTE: Does NOT interfere with tail light visibility

 

$269.01 Add to wishlist Fits Which Model

Tail Light Guard Set

PART #: 99994-0424

Reduce the risk of impact, and ultimately the occurrence of unnecessary repairs. Powder coated .090 inch steel tubing in textured black to provide a uniform look with stock components. Set of 2.

$65.33 Add to wishlist Fits Which Model

Contoured Front Seat

PART #: 99994-0874

Thick cushioned seat provides superior comfort

 

  • Contoured seat bottom cups driver and passenger into the seat
  • Durable seat material remains flexible in cool temperatures
  • Not for rear seat replacement in  MULE PRO-FXT, MULE PRO-DXT models
$441.29 Add to wishlist Fits Which Model

Seat Cover, Black

PART #: 99994-1151

Help protect your bench seats from the elements with these Seat Covers

 

  • Quick installation
  • Made from heavy canvas
  • Features an elastic band along the cover's edge
  • O.E.M. quality fit
  • Includes Top and back covers for front or rear bench seats
$121.47 Add to cart Add to wishlist Fits Which Model

Seat Cover, Realtree Xtra Green

PART #: KAF080-039

Help protect your bench seats from the elements with these Seat Covers

 

  • Quick installation
  • Made from heavy canvas
  • Features an elastic band along the cover's edge
  • O.E.M. quality fit
  • Includes Top and back covers for front or rear bench seats
$125.13 Add to cart Add to wishlist Fits Which Model